#include
#include "..\config\c8051f350.h"#include "..\config\const.h"#include "..\driver\system.h"#include "..\driver\other.h"#define IIC_WRITE 0#define IIC_READ 1#define VREF 24380static unsigned long sysclk=24500000;sbit SDA=P0^0;sbit SCL=P0^1;sbit led=P1^2; void Delay_us(unsigned int times){unsigned int i;for(i=0;iiic_start(void){SDA = 1;Delay_us(2);SCL = 1;Delay_us(2);SDA = 0;Delay_us(2); } //iic通讯起始信号void iic_stop(void){SDA = 0;Delay_us(2);SCL = 1;Delay_us(2);SDA =1;} //iic通讯停止信号void iic_ack(void) { SCL = 0;SDA = 0;Delay_us(2);SCL = 1;Delay_us(2); SCL = 0;Delay_us(1); SDA = 1;} //发送应对信号函数bool read_ack(void) { bool flag;SCL = 0;Delay_us(2); SDA = 1;SCL = 1;Delay_us(2);flag = SDA; SCL = 0; return flag;} //iic应对函数void iic_nack() { SDA = 1;Delay_us(2); SCL = 1;Delay_us(2); SCL = 0;} //iic非应对函数unsigned char get_byte(void) {unsigned char dd;int i;dd=0;SDA = 1;for (i=0;i<8;i++){Delay_us(1);SCL = 0;Delay_us(5);SCL = 1;Delay_us(2); dd<<=1;if (SDA)dd|=0x01;Delay_us(1);} SCL = 0;Delay_us(1);return dd;} //输入一个字节void out_byte(unsigned char dd) {unsigned char i;for(i=0;i<8;i++){ SCL = 0;Delay_us(0); SDA = (dd & 0x80)>>7;Delay_us(2); SCL = 1;Delay_us(3);dd <<= 1;} SCL = 0; } //输出一个字节bool iic_write_addr(unsigned char addr,unsigned char data_addr){iic_start();out_byte(addr); read_ack(); out_byte(data_addr);read_ack(); return TRUE; } //写入器材地址和所需读取寄存器的地址void IICA_Read(unsigned char id, unsigned char addr, unsigned char *p, unsigned int len){ int i;bit EA_SAVE = EA;EA = 0;iic_write_addr(id|IIC_WRITE,addr); iic_start();out_byte(id|IIC_READ);read_ack(); for (i=0;i总线读取多个数据float readTemperature(){unsigned char id=0x90;unsigned char addr=0x00;unsigned int len=2;unsigned char temp[2]={0};float temp_value=0.0;unsigned int temp_high=0;unsigned int temp_low=0;unsigned int low=0;unsigned int tempforh=0;unsigned int judge_posneg=0;IICA_Read(id,addr,temp,2);temp_high=temp[0];temp_low=temp[1];low=temp_low>>5;tempforh=temp_high*8+low;judge_posneg=(temp_high & 0x80)>>7;if(judge_posneg==0){temp_value=tempforh*0.125;return temp_value;}else {tempforh=(tempforh^0x7FF)+1;temp_value=tempforh*(-0.125); return temp_value;}} //读取并核算当时温度float main(){float tempvalue=0.0;PCA0MD&=~0x40; // 制止看门狗定时器Sysclk_Init(); // 装备体系时钟SysPort_Init(); // 端口装备tempvalue=readTemperature();while(1){led=1;Delay_ms(1000);led=0;Delay_ms(1000);}SDA=1;return tempvalue;}
