本程序所用的原理图下载:点这里，单片机芯片运用的stc89c52
/*
*功用：定时器0完成信号交通灯
*
*日期：2013-05-07-08:41
*作者：徐冉
*特别阐明：本程序代码现已经过调试，仅供学习运用；
*
*/
/***********AT89C52-RC单片机试验板***********/
/*****************51hei-开发板*********************/
#include
typedef unsigned int uint;
typedef unsigned char uchar;
sbit LED_hong = P1^0;//红信号灯
sbit LED_lv = P1^2; //绿信号灯
sbit wela = P2^7;
sbit dula = P2^6;
uchar code table[] = {
0x3F, //”0″
0x06, //”1″
0x5B, //”2″
0x4F, //”3″
0x66, //”4″
0x6D, //”5″
0x7D, //”6″
0x07, //”7″
0x7F, //”8″
0x6F, //”9″
0x77, //”A”
0x7C, //”B”
0x39, //”C”
0x5E, //”D”
0x79, //”E”
0x71, //”F”
0x76, //”H”
0x38, //”L”
0x37, //”n”
0x3E, //”u”
0x73, //”P”
0x5C, //”o”
0x40, //”-“
0x00, //平息
0x00 //自定义
};
uchar num = 30, counter;
void init();
void display(uint num);
void delay(uint xms);
void main()
{
init();
while(1)
{
if(counter == 50)
{
counter = 0;
num–;
if(num == 0)
{
num = 30;
LED_hong = ~LED_hong;
LED_lv = ~LED_lv;
}
}
display(num);
}
}
void init()
{
LED_hong = 0;
LED_lv = 1;
TMOD = 0x01;
TH0 = 0xB8;
TL0 = 0x00;
TR0 = 1;
EA = 1;
ET0 = 1;
}
void display(uint num)
{
uchar shi, ge;
shi = num / 10 % 10;
ge = num % 10;
dula = 1;
P0 = table[shi];
dula = 0;
P0 = 0xff;
wela = 1;
P0 = 0xfe;
wela = 0;
P0 = 0x00;
delay(1);
dula = 1;
P0 = table[ge];
dula = 0;
P0 = 0xff;
wela = 1;
P0 = 0xfd;
wela = 0;
P0 = 0x00;
delay(1);
}
void delay(uint xms)
{
uint i, j;
for(i = xms; i > 0; i–)
for(j = 125; j > 0; j–);
}
void int_time0() interrupt 1
{
TH0 = 0xB8;
TL0 = 0x00;
counter++;
}
