#include
#include
#define uchar unsigned char
sbit rs=P3^0;//LCD1602操控脚
sbit rw=P3^1;
sbit e=P3^2;
sbit io=P3^4;//DS1302 PCI总线引脚
sbit rst=P3^5;
sbit sclk=P3^3;
uchar hour,minute,second,year,months,date,day;//显现时刻寄存器
uchar whour,wminute,wsecond,wyear,wmonths,wdate,wday;//设制初始时刻寄存器
uchar code table1[]=”0123456789-:w”;
uchar code table2[]=”Date:20″;
uchar code table3[]=”Time:”;
void delayms(uchar k)//1ms延时
{
uchar j,i;
for(i=0;i
}
void delay2us() //2us延时
{
_nop_();
_nop_();
}
void write1602_data(uchar dat)//1602写数据子程序
{
rs=1;
rw=0;
P1=dat;
delayms(2);
e=0;
e=1;
e=0;
}
void write1602_com(uchar com)//1602写指令子程序
//
{
rs=0;
rw=0;
P1=com;
delayms(5);
e=0;
e=1;
e=0;
}
void init1602()//1602初始化子程序
{
write1602_com(0x38);//lcd1602 16*2显现,5*7点阵,8bit数据接口
write1602_com(0x0f);//开显现,显现光标,光标闪耀
write1602_com(0x06);//当写一字符后地址指针加一,光标加一
write1602_com(0x01);//清屏
}
void disptop() //1602榜首行显现子程序
{
uchar i;
write1602_com(0x80);
for(i=0;i<0x07;i++)
{
write1602_data(table2[i]);
delayms(1);
}
}
void dispbot() //1602第二行显现子程序
{
uchar i;
write1602_com(0xc0);
for(i=0;i<0x05;i++)
{
write1602_data(table3[i]);
delayms(1);
}
}
/*******************************************************/
void write1302byte(uchar dat)//1302写入一个字节子程序
{
uchar i;
sclk=0;
for(i=0;i<8;i++)
{
io=(bit)(dat&0x01);
delay2us();
sclk=1;
delay2us();
sclk=0;
dat=dat>>1;
}
}
uchar read1302byte() //1302读一个字节子程序
{
uchar i,dat;
for(i=0;i<8;i++)
{
dat>>=1;
if(io)
dat|=0x80;
delay2us();
sclk=1;
delay2us();
sclk=0;
delay2us();
}
return dat;
}
void writeset1302(uchar add,uchar dat)//1302读子女程序
{
rst=0;
delay2us();
rst=1;
write1302byte(add);
write1302byte(dat);
rst=0;
}
uchar readset1302(uchar add)//1302写子程序
{
uchar dat;
rst=0;
delay2us();
rst=1;
write1302byte(add);
dat=read1302byte();
rst=0;
return dat;
}
void init1302()//1302初始化子程序
{
uchar flag;
flag=readset1302(0x81);//判别1302是否有备用电池,若有则FLAG为0
if(flag&0x80)
{
writeset1302(0x8e,0x00);
writeset1302(0x80,((wsecond/10)<<4|(wsecond%10)));
writeset1302(0x82,((wminute/10)<<4|(wminute%10)));
writeset1302(0x84,((whour/10)<<4|(whour%10)));
writeset1302(0x86,((wday/10)<<4|(wday%10)));
writeset1302(0x88,((wmonths/10)<<4|(wmonths%10)));
writeset1302(0x8a,((wdate/10)<<4|(wdate%10)));
writeset1302(0x8c,((wyear/10)<<4|(wyear%10)));
writeset1302(0x90,0xa5);
writeset1302(0x8e,0x80);
}
}
uchar readvalue(uchar value) //数据转化
{
uchar a;
a=((value&0x70)>>4)*10+(value&0x0f);
return a;
}
void read1302() //读取时刻
{
uchar value;
value=readset1302(0x81);
second=readvalue(value);
value=readset1302(0x83);
minute=readvalue(value);
value=readset1302(0x85);
hour=readvalue(value);
value=readset1302(0x87);
day=readvalue(value);
value=readset1302(0x89);
months=readvalue(value);
value=readset1302(0x8b);
date=readvalue(value);
value=readset1302(0x8d);
year=((value&0xf0)>>4)*10+(value&0x0f);
}
void disptime() //时刻显现
{
write1602_com(0x87);
write1602_data(table1[year/10]);
write1602_data(table1[year%10]);
write1602_data(table1[10]);
write1602_data(table1[months/10]);
write1602_data(table1[months%10]);
write1602_data(table1[10]);
write1602_data(table1[day/10]);
write1602_data(table1[day%10]);
write1602_com(0xc5);
write1602_data(table1[hour/10]);
write1602_data(table1[hour%10]);
write1602_data(table1[11]);
write1602_data(table1[minute/10]);
write1602_data(table1[minute%10]);
write1602_data(table1[11]);
write1602_data(table1[second/10]);
write1602_data(table1[second%10]);
write1602_com(0xce);
write1602_data(table1[12]);
write1602_data(table1[date]);
}
void inittime() //初始时刻设置
{
whour=23;
wminute=59;
wsecond=20;
wyear=10;
wmonths=12;
wdate=3;
wday=1;
}
void main()
{
inittime();
init1602();
disptop();
dispbot();
init1302();
while(1)
{
read1302();
disptime();
}
}