本程序所用的原理图下载:点这里，单片机芯片运用的stc89c52；找到相应部分即可.这是一整个单片机开发板的电路图其他的疏忽.
hex文件及其工程文件下载：http://www.51hei.com/f/pingfc.rar 下面是程序源码：
/*
*功用：运用矩阵按键使得按键按下时数码管上显现各自对应的数字的立方数
* 优化显现，只显现有用位；
* 且运用独立按键完成key1清零，key2加数，key3减数；
*日期：2013-05-07-10:20
*作者：徐冉
*特别阐明：本程序代码现已经过调试，仅供学习运用；
*
*/
/***********AT89C52-RC单片机-51hei试验板***********/
/*****************51hei开发板*********************/
#include
typedef unsigned int uint;
typedef unsigned char uchar;
sbit wela = P2^7;
sbit dula = P2^6;
sbit key1 = P3^4;
sbit key2 = P3^5;
sbit key3 = P3^6;
sbit fm = P2^3;
uint temp;
uchar code table[] = {
0x3F, //”0″
0x06, //”1″
0x5B, //”2″
0x4F, //”3″
0x66, //”4″
0x6D, //”5″
0x7D, //”6″
0x07, //”7″
0x7F, //”8″
0x6F, //”9″
0x77, //”A”
0x7C, //”B”
0x39, //”C”
0x5E, //”D”
0x79, //”E”
0x71, //”F”
0x76, //”H”
0x38, //”L”
0x37, //”n”
0x3E, //”u”
0x73, //”P”
0x5C, //”o”
0x40, //”-“
0x00, //平息
0x00 //自定义
};
// uchar key; Error!!! 此刻的key值大于258 超出了uchar 故过错！！
uint key;
void display(num);
void delay(uint xms);
void max_kanscan();
void keyscan();
void main(void)
{
while(1)
{
keyscan();
max_kanscan();
display(key);
}
}
void display(num)
{
uchar qian, bai, shi, ge;
qian = num / 1000 % 10;
bai = num / 100 % 10;
shi = num / 10 % 10;
ge = num % 10;
if(num < 10)
{
dula = 1;
P0 =table[ge];
dula = 0;
P0 = 0xff;
wela = 1;
P0 = 0xfe;
wela = 0;
}
else if(num < 100)
{
dula = 1;
P0 =table[shi];
dula = 0;
P0 = 0xff;
wela = 1;
P0 = 0xfe;
wela = 0;
P0 = 0x00;
delay(1);
dula = 1;
P0 =table[ge];
dula = 0;
P0 = 0xff;
wela = 1;
P0 = 0xfd;
wela = 0;
P0 = 0x00;
delay(1);
}
else if(num < 1000)
{
dula = 1;
P0 =table[bai];
dula = 0;
P0 = 0xff;
wela = 1;
P0 = 0xfe;
wela = 0;
P0 = 0x00;
delay(1);
dula = 1;
P0 =table[shi];
dula = 0;
P0 = 0xff;
wela = 1;
P0 = 0xfd;
wela = 0;
P0 = 0x00;
delay(1);
dula = 1;
P0 =table[ge];
dula = 0;
P0 = 0xff;
wela = 1;
P0 = 0xfb;
wela = 0;
P0 = 0x00;
delay(1);
}
else if(num < 10000)
{
dula = 1;
P0 =table[qian];
dula = 0;
P0 = 0xff;
wela = 1;
P0 = 0xfe;
wela = 0;
P0 = 0x00;
delay(1);
dula = 1;
P0 =table[bai];
dula = 0;
P0 = 0xff;
wela = 1;
P0 = 0xfd;
wela = 0;
P0 = 0x00;
delay(1);
dula = 1;
P0 =table[shi];
dula = 0;
P0 = 0xff;
wela = 1;
P0 = 0xfb;
wela = 0;
P0 = 0x00;
delay(1);
dula = 1;
P0 =table[ge];
dula = 0;
P0 = 0xff;
wela = 1;
P0 = 0xf7;
wela = 0;
P0 = 0x00;
delay(1);
}
}
