您的位置 首页 主动

51单片机程序——4乘4矩阵键盘使用方法

includereg52h>defineuintunsignedintdefineucharunsignedchardefinedulaP0definewelaP1unsignedcharcod

#include

#define uint unsigned int
#define uchar unsigned char
#define dula P0
#define wela P1
unsigned char code DuanMa[]={0xc0,0xf9,0xa4,0xb0,
0x99,0x92,0x82,0xf8,
0x80,0x90,0x88,0x83,
0xa7,0xa1,0x86,0x8e,0xff};
uchar num,temp;
void delay(uint z)
{
uint x,y;
for(x=z;x>0;x–)
for(y=110;y>0;y–);
}
uchar keyscan();
void display(uchar aa);
void main()
{
num=16;
while(1)
{
display(keyscan());
}
}
void display(uchar aa)
{
wela=0xff;
dula=DuanMa[aa];
}
uchar keyscan()
{
P2=0xef;
temp=P2;
temp=temp&0x0f;
while(temp!=0x0f) //承认是否按下
{
delay(5);
temp=P2;
temp=temp&0x0f;
while(temp!=0x0f)
{
temp=P2;
switch(temp)
{
case 0xee:num=0;
break;
case 0xed:num=1;
break;
case 0xeb:num=2;
break;
case 0xe7:num=3;
break;
}
while(temp!=0x0f) //松手检测
{
temp=P2;
temp=temp&0x0f;
}
}
}
P2=0xdf;
temp=P2;
temp=temp&0x0f;
while(temp!=0x0f)
{
delay(5);
temp=P2;
temp=temp&0x0f;
while(temp!=0x0f)
{
temp=P2;
switch(temp)
{
case 0xde:num=4;
break;
case 0xdd:num=5;
break;
case 0xdb:num=6;
break;
case 0xd7:num=7;
break;
}
while(temp!=0x0f)
{
temp=P2;
temp=temp&0x0f;
}
}
}
P2=0xbf;
temp=P2;
temp=temp&0x0f;
while(temp!=0x0f)
{
delay(5);
temp=P2;
temp=temp&0x0f;
while(temp!=0x0f)
{
temp=P2;
switch(temp)
{
case 0xbe:num=8;
break;
case 0xbd:num=9;
break;
case 0xbb:num=10;
break;
case 0xb7:num=11;
break;
}
while(temp!=0x0f)
{
temp=P2;
temp=temp&0x0f;
}
}
}
P2=0x7f;
temp=P2;
temp=temp&0x0f;
while(temp!=0x0f)
{
delay(5);
temp=P2;
temp=temp&0x0f;
while(temp!=0x0f)
{
temp=P2;
switch(temp)
{
case 0x7e:num=12;
break;
case 0x7d:num=13;
break;
case 0x7b:num=14;
break;
case 0x77:num=15;
break;
}
while(temp!=0x0f)
{
temp=P2;
temp=temp&0x0f;
}
}
}
return num;
}

声明:本文内容来自网络转载或用户投稿,文章版权归原作者和原出处所有。文中观点,不代表本站立场。若有侵权请联系本站删除(kf@86ic.com)https://www.86ic.net/ziliao/zhudong/260878.html

为您推荐

联系我们

联系我们

在线咨询: QQ交谈

邮箱: kf@86ic.com

关注微信
微信扫一扫关注我们

微信扫一扫关注我们

返回顶部